0 Items - $0.00 My account / Register

FITTINGS, PARTS, & ADAPTERS

Home / BREWING SUPPLIES / BREWING EQUIPMENT / FITTINGS, PARTS, & ADAPTERS

Brass Swivel Union, 1/4" FFL x 1/4" FFL

Specification
Brass 45° Flare Fittings

Swivel
Female Flare Thread

Size: 1/4" FFL x 1/4" FFL

Brass Swivel Union, 1/4" FFL x 1/4" FFL

$2.99

KEG LAND BlowTie Diaphragm Spunding Valve Complete Kit

With this complete kit you'll be ready to use the Blow Tie Spunding Valve right out of the box. The BlowTie is used to release excess pressure on a pressurized fermenter or from a receiving keg during pressure transfers. This diaphragm spunding valve is m

BlowTie Diaphragm Spunding Valve Complete Kit

$29.99

KEG LAND Temp Twister Cooling Coil

The Temp Twister Cooling Coil installs easily on all models of FermZilla fermenter and can be used with virtually any fermenter with an opening diameter of 4-3/8" or wider. The inlet and outlet of the coil are extra long so the coil can be used with every

Temp Twister Cooling Coil

$29.99

KEG LAND Mini Pressure Gauge (0-23 psi)

This mini pressure gauge is compatible with the BlowTie 2 spunding valve, Duotight in-line regulator, and KegLand mini regulator. We recommend using the gauge with a range closest to your desired pressure setting.

Pressure Range: 0-23 psi (0-1.5 bar)

Mini Pressure Gauge (0-23 psi)

$5.99

DUOTIGHT Duotight Push-In Bulkhead - 9.5 mm (3/8 in.) x 1/2 in. BSP

This Duotight Bulkhead is the same one used for installing the Temp Twister cooling coil into the lid of the FermZilla. Allows you to add a bulkhead to just about anything that can then be connected to with EVABarrier 9.5 mm OD Tubing (D1719) or 3/8" OD s

Duotight Push-In Bulkhead - 9.5 mm (3/8 in.) x 1/2 in. BSP

$2.99

DUOTIGHT Duotight Flow Stopper Automatic Keg Filler

The Duotight Flow Stopper is a handy devicie to use while filling kegs or when transferring between kegs during filtering or after fining. Simply attach the Flow Stopper to the gas post of your keg, then when the keg is full it will automatically cut off

Duotight Flow Stopper Automatic Keg Filler

$14.99

DUOTIGHT Duotight Push-In Fitting - 8 mm (5/16 in.) x Female Beer Thread

Description
This Duotight to Female Beer Thread fitting can be used to connect beverage line to faucet shanks instead of a tailpiece, and it's also a convenient option for connecting gas and beverage line to the gas in and bev out on keg couplers. Compat

Duotight Push-In Fitting - 8 mm (5/16 in.) x Female Beer Thread

$2.99

Replacement PRV (35 psi)

Replacement pressure relief valve rated to blow at 35 psi. This is a direct replacement of the PRV featured on the FermZilla and Kegmenter. It is also compatible with homebrew kegs and the KOMOS® CO2 regulator if you desire a lower blowoff pressure.

Replacement PRV (35 psi)

$5.99

KEG LAND FermZilla Thermowell w/ Duotight Bulkhead - 23.6 in.

This thermowell is the best option for monitoring temperatures in the FermZilla but can be installed into almost any fermenter lid with a drilled 8 mm hole. It can be pushed through a bung with a 6-8 mm hole but includes the Duotight bulkhead fitting that

FermZilla Thermowell w/ Duotight Bulkhead - 23.6 in.

$7.99

KEG LAND Carbonation and Line Cleaning Ball Lock Cap - Plastic

This plastic ball lock cap features soda bottle threads, allowing you to convert a 1 or 2 liter soda bottle into a convenient travel growler. The ball lock is compatible with both gas and beverage disconnects, so you can charge the PET bottle before you l

Carbonation and Line Cleaning Ball Lock Cap - Plastic

$6.99

1/2" BALL VALVE W/COOLER BULKHEAD

Input Fitting 0.5″ Male NPT

Output Fitting 0.5″ Female NPT

Port Diam. 0.5″

Max. Bulkhead Span 1¾″

This valve performs well and is built to last. Made of 304 Stainless Steel with high-temperature tolerant Teflon® seals, the valve is

1/2" BALL VALVE W/COOLER BULKHEAD

$29.99

Stainless Gas Pressure Relief

Stainless Gas Pressure Relief

Stainless Gas Pressure Relief

$8.99

Stainless Nipple - 3/8"x1" Threaded (Close)

These are typically used for connecting Ball Valves to couplers welded into tanks. “Close” thread means there is no space between the opposing threads

Stainless Nipple - 3/8"x1" Threaded (Close)

$1.99

3 inch Stainless Steel Hop Steeper With Chain

Made for dry hopping in kegs, the hop bomb is made from 304 stainless steel. The hop bomb fits up to 1 ounce of pellet hops allowing the hops to have enough space to move around for better extraction. The included chain allows it to be suspended from keg

3 inch Stainless Steel Hop Steeper With Chain

$3.99

BULKHEAD 1/2"FPT X 1/2"FPT

This stainless steel bulkhead is 1/2" FPT x 1/2" FPT with a flat, thick rubber washer that makes is very easy to install on most kettles.

BULKHEAD 1/2"FPT X 1/2"FPT

$11.99

BULKHEAD- STAINLESS STEEL W/ O-RINGS

BULKHEAD- STAINLESS STEEL W/ O-RINGS

BULKHEAD- STAINLESS STEEL W/ O-RINGS

$8.99

TAILPIECE- 1/4" FLARE THREAD

TAILPIECE- 1/4" FLARE THREAD

TAILPIECE- 1/4" FLARE THREAD

$6.99

Stainless Coupler - 3/4 in. FPT x 1/2 in. FPT

A stainless steel coupler with 3/4" FPT x 1/2" FPT threads. Great for March Pumps with a 3/4" Center Inlet!

Stainless Coupler - 3/4 in. FPT x 1/2 in. FPT

$3.99

Hex Head Plug, 1/4MPT (RHT)

Brass Pipe Fittings

Hex Head Pipe Plug
Male Pipe Thread

Size: 1/4" MPT (RHT)

Hex Head Plug, 1/4MPT (RHT)

$0.99

Pipe Cutter

If you're installing a stainless thermowell or Temp Twister Cooling Coil on your FermZilla, this pipe cutter will help make the process painless.

This easy to use pipe cutter makes cutting copper, stainless steel, or aluminum tubing an absolute breeze.

$5.99

Beer & Gas Quick Connect - In-Line Set (With Shut-Off)

Use these high quality, food-grade quick-disconnects on your gas and beer tubing lines. Uses might include the following:

* On a gas system to unhook your tank and regulator from your manifold so you take it with you.
* On a beer line to easily switch

Beer & Gas Quick Connect - In-Line Set (With Shut-Off)

$14.99

Flare Fitting - 1/4" Male Flare x 1/4" Barb

Stainless steel flare fitting used in draft beer systems for various configurations.

Flare Fitting - 1/4" Male Flare x 1/4" Barb

$2.49

DUOTIGHT Duotight Push-In Fitting - 9.5 mm (3/8 in.) x 1/2 in. BSP

This Duotight to 1/2" female thread fitting can be used to connect beverage or gas line to any fitting with 1/2" MPT. Compatible with EVABarrier 9.5 mm OD Tubing (D1719).

Duotight fittings are high-quality push-in fittings that seal tight and offer su

Duotight Push-In Fitting - 9.5 mm (3/8 in.) x 1/2 in. BSP

$2.49

Helix Coil Kettle Tube

The Helix Coil makes for an excellent false bottom replacement, and installs easily on most cooler mash tuns and kettles. No matter how the coil rests, whether in a perfect circle or looped, the Helix works effectively as long as it isn't kinked. Measures

Helix Coil Kettle Tube

$19.99