0 Items - $0.00 My account / Register

DUO-TIGHT FITTINGS

Home / BREWING SUPPLIES / BREWING EQUIPMENT / DUO-TIGHT FITTINGS

KEG LAND Mini Pressure Gauge (0-23 psi)

This mini pressure gauge is compatible with the BlowTie 2 spunding valve, Duotight in-line regulator, and KegLand mini regulator. We recommend using the gauge with a range closest to your desired pressure setting.

Pressure Range: 0-23 psi (0-1.5 bar)

Mini Pressure Gauge (0-23 psi)

$5.99

KEG LAND Temp Twister Cooling Coil

The Temp Twister Cooling Coil installs easily on all models of FermZilla fermenter and can be used with virtually any fermenter with an opening diameter of 4-3/8" or wider. The inlet and outlet of the coil are extra long so the coil can be used with every

Temp Twister Cooling Coil

$29.99

KEG LAND BlowTie Diaphragm Spunding Valve Complete Kit

With this complete kit you'll be ready to use the Blow Tie Spunding Valve right out of the box. The BlowTie is used to release excess pressure on a pressurized fermenter or from a receiving keg during pressure transfers. This diaphragm spunding valve is m

BlowTie Diaphragm Spunding Valve Complete Kit

$29.99

KEG LAND BlowTie Diaphragm Spunding Valve with Gauge

The Blow Tie Spunding Valve is used to release excess pressure on a pressurized fermenter or from a receiving keg during pressure transfers. This diaphragm spunding valve is much more accurate than the spring and poppet style, and works much better at low

BlowTie Diaphragm Spunding Valve with Gauge

$19.99

DUOTIGHT Duotight Push-In Bulkhead - 9.5 mm (3/8 in.) x 1/2 in. BSP

This Duotight Bulkhead is the same one used for installing the Temp Twister cooling coil into the lid of the FermZilla. Allows you to add a bulkhead to just about anything that can then be connected to with EVABarrier 9.5 mm OD Tubing (D1719) or 3/8" OD s

Duotight Push-In Bulkhead - 9.5 mm (3/8 in.) x 1/2 in. BSP

$2.99

KEG LAND FermZilla Thermowell w/ Duotight Bulkhead - 23.6 in.

This thermowell is the best option for monitoring temperatures in the FermZilla but can be installed into almost any fermenter lid with a drilled 8 mm hole. It can be pushed through a bung with a 6-8 mm hole but includes the Duotight bulkhead fitting that

FermZilla Thermowell w/ Duotight Bulkhead - 23.6 in.

$7.99

DUOTIGHT EVABarrier Double Wall Draft Tubing - 6 mm ID x 9.5 mm OD

If you're looking for a high-quality draft tubing to take your system into the 21st century, EVABarrier is the clear choice. This double walled tubing offers superior protection against oxidation, CO2 loss and microbial growth. Plus, it's BPA and PVC free

EVABarrier Double Wall Draft Tubing - 6 mm ID x 9.5 mm OD

$0.70

DUOTIGHT Duotight Push-In Fitting - 8 mm (5/16 in.) x 1/4 in. BSP

This Duotight fitting with 1/4" male thread is a great option for connecting gas line to regulators and manifolds that have 1/4" FPT. Comes with seated O-ring. Compatible with EVABarrier 8 mm OD Tubing (D1717 & D1718).

Duotight fittings are high-qual

Duotight Push-In Fitting - 8 mm (5/16 in.) x 1/4 in. BSP

$2.49

DUOTIGHT Duotight Flow Stopper Automatic Keg Filler

The Duotight Flow Stopper is a handy devicie to use while filling kegs or when transferring between kegs during filtering or after fining. Simply attach the Flow Stopper to the gas post of your keg, then when the keg is full it will automatically cut off

Duotight Flow Stopper Automatic Keg Filler

$14.99

Draft Multi Tool with Duotight Remover (7 in 1)

The KOMOS™ multi tool is a convenient instrument to keep nearby that is suitable for most of the fittings you'll encounter when setting up or making adjustments to your kegerator or keezer. If you're kegging your brew then you're well acquainted with the

Draft Multi Tool with Duotight Remover (7 in 1)

$4.99

DUOTIGHT Duotight Push-In Fitting - 9.5 mm (3/8 in.) x 1/2 in. BSP

This Duotight to 1/2" female thread fitting can be used to connect beverage or gas line to any fitting with 1/2" MPT. Compatible with EVABarrier 9.5 mm OD Tubing (D1719).

Duotight fittings are high-quality push-in fittings that seal tight and offer su

Duotight Push-In Fitting - 9.5 mm (3/8 in.) x 1/2 in. BSP

$2.49

DUOTIGHT Tube Cutter - 2-in-1 with Duotight Removal Tool

For clean, straight cuts this 2-in-1 cutter is hard to beat. Developed specifically for EVABarrier draft line, but compatible with any tubing that is 3/8" OD or smaller. Features an 8mm jaw on the back to easily pull the collet back when removing line fro

Tube Cutter - 2-in-1 with Duotight Removal Tool

$4.99

KEG LAND Push-In Pressure Gauge (0-40 psi)

The Push-In Pressure Gauge is the ideal companion for the BlowTie spunding valve (FE960). It comes with an 8 mm (5/16 in.) barb, specifically designed to be compatible with 8 mm Duotight fittings. By pairing this pressure gauge with the BlowTie, you'll be

Push-In Pressure Gauge (0-40 psi)

$7.99

DUOTIGHT Duotight Push-In Fitting - 8 mm (5/16 in.) x 1/4 in. Flare

This Duotight fitting with 1/4" Flare is perfect for flared gas and beverage ball lock and pin lock disconnects. It can also be used to connect gas line to the flare fitting found on the KOMOS® CO2 Regulator. Compatible with EVABarrier 8 mm OD Tubing (D17

Duotight Push-In Fitting - 8 mm (5/16 in.) x 1/4 in. Flare

$2.99

KEG LAND Mini Pressure Gauge (0-60 psi)

This mini pressure gauge is compatible with the BlowTie 2 spunding valve, Duotight in-line regulator, and KegLand mini regulator. We recommend using the gauge with a range closest to your desired pressure setting.

Pressure Range: 0-60 psi (0-4 bar)
Bo

Mini Pressure Gauge (0-60 psi)

$5.99

DUOTIGHT Duotight Push-In Fitting - 9.5 mm (3/8 in.) x 1/4 in. Flare

This Duotight fitting with 1/4" Flare is perfect for flared gas ball lock and pin lock disconnects. Can also be used to connect gas line to the flare fitting found on the KOMOS® CO2 Regulator. Compatible with EVABarrier 9.5 mm OD tubing (D1719). Although

Duotight Push-In Fitting - 9.5 mm (3/8 in.) x 1/4 in. Flare

$2.99

DUOTIGHT Duotight Push-In Fitting - 8 mm (5/16 in.) Elbow

This Duotight elbow fitting is compatible with EVABarrier 8 mm OD Tubing (D1717 & D1718).

Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design.

High Perform

Duotight Push-In Fitting - 8 mm (5/16 in.) Elbow

$1.99

DUOTIGHT Duotight Push-In Fitting - 8 mm (5/16 in.) Ball Valve

This Duotight ball valve can be used as an inline shut off valve on draft lines. Compatible with EVABarrier 8 mm OD Tubing (D1717 & D1718).

Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to

Duotight Push-In Fitting - 8 mm (5/16 in.) Ball Valve

$2.99

DUOTIGHT EVABarrier Double Wall Draft Tubing - 4 mm ID x 8 mm OD

If you're looking for a high-quality draft tubing to take your system into the 21st century, EVABarrier is the clear choice. This double walled tubing offers superior protection against oxidation, CO2 loss and microbial growth. Plus, it's BPA and PVC free

EVABarrier Double Wall Draft Tubing - 4 mm ID x 8 mm OD

$0.59

DUOTIGHT Duotight Push-In Fitting - 8 mm (5/16 in.) Tee

This Duotight fitting makes it easy to split your gas line and run it to multiple kegs. Use one tee for a dual tap kegerator or two tees for a triple tap. You can also pair the tee with the Push-In Pressure Gauge to use the gauge with the BlowTie Spunding

Duotight Push-In Fitting - 8 mm (5/16 in.) Tee

$2.49

KEG LAND BlowTie Diaphragm Spunding Valve

The Blow Tie Spunding Valve is used to release excess pressure on a pressurized fermenter or from a receiving keg during pressure transfers. This diaphragm spunding valve is much more accurate than the spring and poppet style, and works much better at low

BlowTie Diaphragm Spunding Valve

$14.99

DUOTIGHT Duotight Push-In Fitting - 8 mm (5/16 in.) x Female Beer Thread

Description
This Duotight to Female Beer Thread fitting can be used to connect beverage line to faucet shanks instead of a tailpiece, and it's also a convenient option for connecting gas and beverage line to the gas in and bev out on keg couplers. Compat

Duotight Push-In Fitting - 8 mm (5/16 in.) x Female Beer Thread

$2.99

KEG LAND Carbonation and Line Cleaning Ball Lock Cap - Plastic

This plastic ball lock cap features soda bottle threads, allowing you to convert a 1 or 2 liter soda bottle into a convenient travel growler. The ball lock is compatible with both gas and beverage disconnects, so you can charge the PET bottle before you l

Carbonation and Line Cleaning Ball Lock Cap - Plastic

$6.99